The Rescue Tube is designed to meet the Surf Life Saving equipment standards for flexibility, buoyancy, and sturdiness. Made with durable canvas and rope, plus a stainless steel clip resistant to corrosion. At 700 grams, it is lightweight and well-suited for lifesaving activities.

SURF LIFESAVING NEW ZEALAND APPROVED FOR IRB & POOL COMPETITIONS

SURF LIFESAVING NEW ZEALAND COMPETITION APPROVED

Are you sick of your HT Lead and Boot arcing out?

Install these aftermarket HT Lead and Boot and never have that problem again.

Simply unscrew the old ones and screw in the new!

350mm long can be chopped to suit the top or the bottom cylinder.

Aranica IRB replacement part.

These Auto Bailer are great for allowing the water to get out of the IRB when moving and not letting the water in when not moving.

SURF LIFESAVING NEW ZEALAND COMPETITION APPROVED

When selecting a 15L fuel bladder, there are several options to consider, including rope attachment - officially approved for competition use, but may need to be replaced and can become undone - and metal attachments, which provide longer-lasting use.

For the fuel hose, consider the connecting side of the outboard - if it is the standard port (left) side, then the 2.5m hose is sufficient, but if it is retrofitted to the starboard (right) side, then the 3m hose is required to make the turn. Additionally, all joints are covered with heat shrink tubing for added protection.

We stock the best selling ‘Ultra Competition PFD’ manufactured by ULTRA PFD.

All PFD’s are manufactured to New Zealand Standards and approved by Surf Life Saving New Zealand.

ULTRA PFD’s are ready to race and ready to rescue.

The ULTRA Competition PFD features:

Radio Pouch

High quality premium soft foam – comfort.

Split foam design – flexibility & comfort.

Shoulder reflective tape – safety .

Shorter cut & tapered waist – comfort.

SLSNZ approved 

Sizes:

SMALL – ( Approx 90cm chest )

MEDIUM – ( Approx. 100cm chest )

LARGE – ( Approx 110 cm chest )

X – LARGE – Approx. 120cm chest )

2X – LARGE – ( Approx 130cm chest )

3X LARGE – ( Approx 140cm chest )

Replacement part for Aranica IRB

 Nickel-plated brass removable core inflating/deflating with safety rubber cap

Stainless steel insulated water bottle.

comes with:

- 1x bottle 950ml, 1 x plain lid, 1x sipping lid, 1x straw.

Genuine Mercury split pins x5 pack for 30hp outboards

Ultra lightweight, durable woven fabric is built for the most intense workouts. These shorts contain mesh panels for strategic ventilation, along with 4 way stretch, so material moves better in every direction providing superior comfort. Sweat-wicking material construction dries fast. 

• Fit: Fitted
• Material: 100% Polyester

Replacement Rubber Cap

From time to time people get a bit rough and it breaks, now you can replace just the cap not needing to by a hole new valve.

Genuine Mercury Quicksilver male fuel bayonet

The Titan 2 Pump is the world's first purpose-built, double chamber SUP pump. It's designed to cut the amount of time and effort it takes to inflate your board by half. Constant innovation has led to us testing the absolute boundaries of inflation technology and as such, we're confident that there's nothing quite like the Titan II pump on the market.

The Dual Cylinder system, combined with the Hi Flo handle means you are in complete control of the energy used to inflate your board. It puts the volume into your board faster and reduces the effort required to reach a higher pressure.

This 50L dry bag is constructed from durable waterproof material, making it ideal for protecting your valuables from water, dust, and snow. It has reinforced seams for added strength, making it suitable for extreme outdoor activities. With an adjustable shoulder strap for easy carrying, it allows for secure and convenient transport of your possessions.

This custom made spanner made from 10mm 304 Stainless Steel

Open end is 24mm for your steering adjustment

Ring end is 32mm for your adjustment

In the box above write the custom engraving you would like on the spanner, if you order multiple and want different text on each, write in the box above.

Smooth ID Clamps reduce the risk of leaks especially when used on thin walled hoses.

• Vibration resistant lip lock design. No hammering or crimping
• Unique buckle nest and smooth ID design reduces leak paths
• Double wrapped steel bands for additional strength
• Various materials for corrosive environments
• Available for hose assemblies up to 8" outside diameter

Tool required to install - Stainless Steel Cable Tie Tension And Cut Off Tool

• Handy tool to tension and cut ties
• Perform the job professionally
• Makes fitting Stainless steel ties easy

If you need Stainless Steel Bands 35mm x 6mm

The easiest way to empty a Fuel Bladder

Install the Dainer under the cap of the Jerry Can, rise the bladder above and let it empty.

Standard Hollow Tilt Tube

We recommend using the hollow tube as they do less damage to the rest of the engine if over tightened. Also the tube fails rather than the swivel bracket or transom brackets.

In extreme situations the hollow tube can be easily cut out.

Replacement part for 30hp Mercury

30hp Mercury Plastic Cowling, this plastics cowling is made for Mercury outboards with serial numbers ON160523 and up.

SURF LIFESAVING NEW ZEALAND COMPETITION APPROVED

Solid copper core

Install these aftermarket HT Lead and Boot and never have that problem again.

Simply unscrew the old ones and screw in the new!

300mm long can be chopped to suit the top or the bottom cylinder.

Best, simplest, toughest all-round scuba knife.

Yellow handle. Rubber straps.

150mm single cutting edge blade with serration.

Made from marine grade 420 stainless steel for the ultimate in strength.

Incorporating a full rubber handle.

A conventional one-handed operation toggle style sheath and rubber straps.

Note: 420 stainless steel will always hold an edge but can be susceptible to surface rusting if not cleaned correctly after use.

Buy single or a pair.

316 Stanless Steel

Ready to Plug and Play

This large toggle switch is specially designed for marine conditions. A weatherproof rubber boot covers the actuator, and the switch mechanism is encapsulated in rubber. For this reason, 150mm fly leads are attached instead of the usual terminals. Not only limited to marine use, it can also be used as an ultra-durable switch in many applications

25L Quicksilver Fuel Tank

Built in fuel gauge to easily keep track of how much fuel is left.

Quicksilver Fuel Tank comes with a 2.5m fuel hose.

Custom Bow Ropes

Standard New Zealand length 1100mm

Standard Australian length 1150mm with 4 knots

In the "Custom Design" box please put the length of Bow Rope with out knots.

If you have size 13 or size 5 feet these can be adjusted to suit every driver or crewperson.

Made from industrial Velcro these are simple and fast to adjust.

Adjustable Foot Strap comes with:

• 4x bolts,
• 4x washers
• 4x nuts

ONLY AVAILABLE TO LIFESAVING CLUBS.

 SURF LIFESAVING NEW ZEALAND APPROVED

There are a few different options to choose from when it comes to fuel bladders.

Rope attachment - Competition Approved but will need replacing and can come undone.

Metal attachments - Great for normal use, will out last the bladder.

2.5m vs 3m fuel hose

lt comes down to which side of the outboard the fuel line connects. If standard side, Port (left) then 2.5m hose is perfect but if you have retrofitted it to the Starboard (right) then you will need the 3m hose so you can turn the outboard.

All Joins are covered with heat shrink to remove and shape edges. 

Genuine Mercury Fuel hose assembly

2.5m vs 3m fuel hose

lt comes down to which side of the outboard the fuel line connects. If standard side, Port (left) then 2.5m hose is perfect but if you have retrofitted it to the Starboard (right) then you will need the 3m hose so you can turn the outboard.

All Joins are covered with heat shrink to remove and shape edges. 

70mm 316 Stainless steel spring clips with quick links

• 4x Quick Links
• 4x 70mm Spring Clips

The surface mounted Digital tach-hour Gauge allows you to easily monitor RPM and hours of use. These are the most accurate and reliable we have found. We use them for all our propeller testing.

• Large readable display allows you to easily monitor your engine's running hours up to 99,999 total hours ensuring that you perform proper maintenance on your engine.
• The LCD display lets you to easily view all gauge readings regardless of the angle or lighting conditions.
• Tachometer from 0-19999 rpms
• Non-resetable hour meter from 0-99999 Hours
• Surface mount for easy install, comes with double sided tape or can be bolted on
• Max RPM features
• Black case

Recommended setting for 30hp 2 stroke Mercury outboard. Pulse per revolution (PPr) 2.0

Reusable mat with a replaceable, internal absorbent for catching leaks and drips when refuelling or uncoupling hoses.

The chain weighted sides keeps the spill mat in position even in windy conditions.

Two internal heavy duty oil/fuel absorbent mats (90cm x 90cm) catch and absorb the spill. Mats are manufactured from Envirosorb™, a highly absorbent hydrophobic (water repellent) polypropylene.

Mats are easily replaceable through the velcro sides when fully saturated with oil.

Tabs hold the mat in a tight roll for easy storage.

Special loop attachment allows mat to be hang during storage.

PVC backed mat protects the absorbent from mud and dirt on the ground.

Open weave shade cloth on the top of the mat allows easy penetration of spilt liquid.

Its like a first aid kit, except its for spills. One of the most flexible and popular Controlco Spill Kits, this is an absolute must for all Kiwi workshops, panel shops and oil stores. We cant imagine anyone managing without it.

• For all mild liquids including water based

• Packaged in a durable, easy to access pail

• 1 x Spill Kit Bucket - Blue

• 10 x Sorbent Pads - General Purpose - Heavy Weight

• 2 x Sorbent Socks - General Purpose - 1.2m

• 1 x Rocksorb - 4L

• 1 x pair Safety Gloves - Red PVC

• 1 x Hazardous Waste Bags

• 1 x Laminated Instruction Card

Ultra lightweight, durable woven fabric is built for the most intense workouts. These shorts contain mesh panels for strategic ventilation, along with 4 way stretch, so material moves better in every direction providing superior comfort. Sweat-wicking material construction dries fast. 

• Fit: Fitted
• Material: 100% Polyester

A pair 30hp Mercury Outboard transom brackets.

Need an outboard kill switch with safety lanyard, hold the button or pull off the lanyard to stop the outboard from running.

Our custom made pressure gauges have a rage from 0-100kpa indication every 2kpa. 

We have added a red line at 25kpa (recommended pressure for pontoons ans kelson). 

They come with a protective shock cover and on the back we have attached a "ShockWatch" sensor that will change colour when dropped from greater than 1m to indicate that it might be damaged or need re calibrating. 

The lens is removable so they can be calibrate if required.

They also come with a bay bridge valve adapter. 

This adapter can also be used on the end of a air compressor, in a foot or hand pump hose.

SURF LIFESAVING NEW ZEALAND COMPETITION APPROVED

The engine is not meeting specifications. To solve this issue, remove the top two engine mount nylock nuts and replace them with these M10 Dome Nuts.

Space to hold 5 Can Capacity & 6 Slot Holder for air tools. See photo for measurements.

I can confidently recommend this Mobile Phone Waterproof Bag. We have tested and proven them to be 100% waterproof, this bag allows you to use your phone in any environment without worrying about water damage. Keep your device safe and functional with this essential accessory.

Smooth ID Clamps reduce the risk of leaks especially when used on thin walled hoses.

• Vibration resistant lip lock design. No hammering or crimping
• Unique buckle nest and smooth ID design reduces leak paths
• Double wrapped steel bands for additional strength
• Various materials for corrosive environments
• Available for hose assemblies up to 8" outside diameter

Tool required to install - Stainless Steel Cable Tie Tension And Cut Off Tool

Perfect for on patrol or just normal use. Have been straightened after bent. This is for a single toggle

This is a custom made spanner made from 10mm 304 Stainless Steel

Open end is 24mm for your steering adjustment

Ring end is 32mm for your adjustment

If you would like Custom text engraved onto the spanner follow link

Since boat engines are designed to run at constant RPMs and are put under intense loads, it is very important to properly run-in your motor for reliability and to ensure full life cycle is achieved. although It is a simple process not everyone has the time in there busy week/weekend to complete it for their outboard. We recommend that everyone with a new motor follow the run-in procedure that their manufacturer recommends.

our run-in consists of;

- 10 hours in a tank as per the mercury manual 
- Petrol and oil included
- Basic service after 10 hours included.

*any special requests from user will be considered

We repair propeller guard, weather its a small weld or fully replacing a vain give us a call to discuss.

Welding from $30

Vain Replacement from $80

Sometime it maybe more cost effective to buy a new or used propeller guard.

 This Patrol Service has been designed to get your 30hp Mercury ready for reliable operation for either surf lifesaving patrol or before the fishing season.

 Our Patrol Service 30 point check.

1. Change Gear Box Oil.
2. Water pump impeller and housing assessed for condition*.
3. Gear box bolts greased and tightened.
4. Prop guard bolts Loctite and tightened.
5. Prop guard veins straightened.
6. Prop guard inspected for cracks and repaired.*
7. Propeller Split pin and Crown nut assessed for condition*.
8. Gear lever selector Loctite and tightened.
9. Recoil removed, cleaned and assessed for condition*.
10. Tiller arm assembly assessed for condition*.
11. Tiller arm mount bolts greased and tightened.
12. Tiller arm tension set so it doesn’t fall.
13. Check the motor makes full throttle.
14. Inspect the chock for function and doesn't stick.
15. Clean fuel filter.
16. Fuel bayonet assessed for condition*.
17. Check fuel lines are not kinked or damaged*.
18. Check spark plug leads/caps not damaged*.
19. Air Box bolts secured with Loctite.
20. Check electrical wires for damage.
21. Tidy electrical wires with new cable tie.
22. Toggle not bent*.
23. Toggle Feet Secured with Loctite.
24. Check no arcing of electrical Leads.
25. Set Idle and fuel mixture.
26. Compression test both chambers.
27. Grease motor nipples.
28. Check Safety Strop for condition*.
29. Engine cleaned.
30. Fit Cowling.

*  May require additional parts, costs are charge additionally to service price.

Please enquire with any questions

ONLY AVAILABLE TO LIFESAVING CLUBS PLEASE INPUT CLUB NAME ABOVE BEFORE ORDERING

SURF LIFESAVING NEW ZEALAND APPROVED

There are a few different options to choose from when it comes to 25L fuel bladders.

Metal attachments - Great for normal use, will out last the bladder.

2.5m vs 3m fuel hose

lt comes down to which side of the outboard the fuel line connects. If standard side, Port (left) then 2.5m hose is perfect but if you have retrofitted it to the Starboard (right) then you will need the 3m hose so you can turn the outboard.

All Joins are covered with heat shrink to cover any shape edges. 

Loctite 454 is an instant adhesive designed for the assembly of difficult-to-bond materials which require uniform stress distribution and high tensile and/or shear strength. The product provides for the rapid bonding of a wide range of materials, including metals, plastics and elastomers. The gel consistency enables overhead and vertical application. Loctite 454 is also suited to bonding porous materials such as wood, paper, leather and fabric. Perfect for all quick repair jobs.

LOCTITE 263 is a red, dual cure, acrylic dimethacrylate ester fluorescent threadlocker designed for the permanent locking and sealing of threaded fasteners. It cures between close fitting metal surfaces and prevents loosening and leakage from shock and vibration. It works on active metals (e.g. brass, copper) and passive substrates such as stainless steel and plated surfaces.

This Performance Service has been designed to get your 30hp Mercury ready to race at its optimal performance. While ensuring your tilt and steering hold strong throughout the weekend.

This is recommended to be done once a season or before a major competition (North Island Championships and NZ IRB Nationals).

 Our performance 50 point check.

1. Change Gear Box Oil.
2. Adjust turning arc to within specification.
3. Water pump impeller assessed for condition*.
4. Water pump housing assessed for condition*.
5. Gear box bolts greased and tightened.
6. Prop guard bolts Loctite and tightened.
7. Prop guard veins straightened.
8. Prop guard inspected for cracks and repaired.*
9. Prop guard and prop has uniform clearance.
10. Propeller Crown nut assessed for condition*.
11. Propeller Split pin assessed for condition*.
12. Gear lever selector Loctite and tightened.
13. Recoil removed, cleaned and assessed for condition*.
14. Pull cord rope not frayed, or damaged*.
15. Pull cord handle assessed for condition*.
16. Pull cord catch assessed for condition*.
17. Recoil bolts tight and Loctite.
18. Tiller arm assembly assessed for condition*.
19. Tiller arm mount bolts greased and tightened.
20. Tiller arm tension set so it doesn’t fall.
21. Throttle linkages not worn or loose.
22. Check the motor makes full throttle.
23. Inspect the chock for function and doesn't stick.
24. Clean fuel filter.
25. Check fuel bayonet can fit easily and adjusted.
26. Fuel bayonet cleaned as required.
27. Check fuel lines are not kinked or damaged*.
28. Check spark plug leads/caps not damaged*.
29. Air Box bolts secured with Loctite.
30. Check electrical wires for damage.
31. Fuel line on gear lever side if requested.
32. Tidy electrical wires with new cable tie.
33. Tilt tube cleaned and assessed for condition*.
34. Tilt tightening when adjusted.
35. Toggle not bent*.
36. Toggles cleaned.
37. Toggle Feet Secured with Loctite.
38. Check engine mount bolt spins.
39. Tension Engine mounts.
40. Steering stiffens when bolt is tightened.
41. Power tune motor.
42. Check no arcing of electrical Leads.
43. Set Idle.
44. Set fuel mixture.
45. Compression test both chambers.
46. Grease motor nipples.
47. Check Safety Strop for condition*.
48. Engine cleaned.
49. Sandpaper fitted to gear lever.
50. Fit Cowling.

*  May require additional parts, costs are charge additionally to service price.

Please enquire with any questions

Aluminium 3 blade propeller, rubber hub.

10" diameter, 3-blades, 13" Pitch right-hand rotation.

Colour: Black

This propeller is suited for a 30hp Mercury outboard engine.

This product is a tool box in a tube. From repairing leaks to attaching bladder loops back to the floorboards this product does it all

401 Loctite is the ultimate toolbox-in-a-can, providing a reliable solution for most everyday repairs. It guarantees a strong, lasting bond to virtually all materials, making it an essential tool in any home. With its unmatched durability, it guarantees a hassle-free fix every time.

• 20 Liter capacity
• Easy to Use
• Self-Venting Spout
• Spout stores inside when not in use
• Compact profile for easy storage
• Measures 470(H) x 330(L) x 190(W)mm

The Scepter fuel container are made from durable high-density polyethylene, the containers are strong, rust-proof and non-corrosive. Its unique military style profile carries a smaller footprint making it easy to store in smaller spaces.

Comes with Mounts, Bolts, Washer and Nyloc Nuts.

This part is made to strengthen the mid section of the engine.

It can be tightened with a 24mm spanner which makes the turning tighten.

The tighter the turning the stronger the mid section will be.

The Pro-Pell Propguards were developed in conjunction with Surf Lifesaving New Zealand to overcome performance problems with previous guards. The gains were so significant that the design was patented and Pro-pell is now the guard of choice for Surf rescue in several countries around the world.

PERFORMANCE

Pro-Pell propguards use a patented design to achieve optimal performance by: 

• Reducing cavitation.
• Increasing turning speeds.
• Getting up on the plane quicker.
• Generating more precise and positive handling than an outboard with an un-guarded prop.

These advantages are even more pronounced in surf conditions where the water is aerated. Pro-Pell guards also have the added advantage of protecting your prop from low impact damage