This 1L Plastic Measuring Cup is a must-have for accurate measurements, with 100mL increments, this cup offers precise readings. Its oil and fuel resistant design makes it durable and long-lasting.

2 Pack RT22 Small

The RT22 portable walkie talkie two-way radio gives you instant communication—without the bulky look and feel of a traditional radio. At just 13mm, it fits easily in your hand, or discreetly in a jacket or pants pocket. At only 109g, you can move freely and comfortably without being weighed down. 

With 1-2km of range this are perfect for a lot of applications. 

What's in the box

• 2 x RT22 Mini and lightweight License-free Two Way Radios
• 2 x Battery
• 2 x Belt Clip
• 2 x Adapter
• 2 x USB charging cable
• 2 x User manual

Its like a first aid kit, except its for spills. One of the most flexible and popular Controlco Spill Kits, this is an absolute must for all Kiwi workshops, panel shops and oil stores. We cant imagine anyone managing without it.

• For all mild liquids including water based

• Packaged in a durable, easy to access pail

• 1 x Spill Kit Bucket - Blue

• 10 x Sorbent Pads - General Purpose - Heavy Weight

• 2 x Sorbent Socks - General Purpose - 1.2m

• 1 x Rocksorb - 4L

• 1 x pair Safety Gloves - Red PVC

• 1 x Hazardous Waste Bags

• 1 x Laminated Instruction Card

20m Throw Bag using 8mm Nylon rope with a Breathable pouch for drying

Quicksilver Fuel Tanks. Quicksilver fuel tanks are 25-litre and come with quick-release fuel connectors.

The Quicksilver fuel lines suitable for the quick release fuel tanks are available in 2.5m (8ft) standard lengths or 3.6m (12ft) longer by request.

Having a spare fuel tank, ready to connect is a great safety feature when out at sea or on a river.

Remember to use freash fuel as research suggests that fuel goes off after about 3 weeks in a fuel tank.

Replacement part for 30hp Mercury

Good condition second hand 30hp Mercury fiberglass Cowling.

Small amount of wear and tread but works perfectly fine.

This fibreglass cowling is made for Mercury outboards with serial numbers ON160522 and down.

This Mercury Outboard is in great condition. One previous user surf life saving.

This motor comes complete with strengthened mid-section fitted with a PSP surf lifesaving kit. This ensures that if this is taken in the surf it can handle a few hits and bumps.

We have completed our (Patrol Service). which includes new gearbox oil, inspected water pump, new sparkplugs etc.

This motor has been tested under load to ensure functionality.

Can to use with stainless steel 3 blade propeller, propeller guard.

Please call to organize viewing. 

*Aluminum 3 blade propeller can upgrade to SS on request (Please call).

This Mercury Outboard is in great condition. One previous user surf life saving.

This motor comes complete with strengthened mid-section fitted with a PSP surf lifesaving kit. This ensures that if this is taken in the surf it can handle a few hits and bumps.

We have completed our (Patrol Service). which includes new gearbox oil, inspected water pump, new sparkplugs etc.

This motor has been tested under load to ensure functionality.

Please call to organize viewing, 0211848137.

Since boat engines are designed to run at constant RPMs and are put under intense loads, it is very important to properly run-in your motor for reliability and to ensure full life cycle is achieved. although It is a simple process not everyone has the time in there busy week/weekend to complete it for their outboard. We recommend that everyone with a new motor follow the run-in procedure that their manufacturer recommends.

our run-in consists of;

- 10 hours in a tank as per the mercury manual 
- Petrol and oil included
- Basic service after 10 hours included.

*any special requests from user will be considered

30hp Mercury Plastic Cowling, this plastics cowling is made for Mercury outboards with serial numbers ON160523 and up.

We have fitted and installed a complete PSP cowling clip so you can get straight back into using your outboard.

The Pro-Pell Propguards were developed in conjunction with Surf Lifesaving New Zealand to overcome performance problems with previous guards. The gains were so significant that the design was patented and Pro-pell is now the guard of choice for Surf rescue in several countries around the world.

PERFORMANCE

Pro-Pell propguards use a patented design to achieve optimal performance by: 

• Reducing cavitation.
• Increasing turning speeds.
• Getting up on the plane quicker.
• Generating more precise and positive handling than an outboard with an un-guarded prop.

These advantages are even more pronounced in surf conditions where the water is aerated. Pro-Pell guards also have the added advantage of protecting your prop from low impact damage

The Pro-Pell Propguards were developed in conjunction with Surf Lifesaving New Zealand to overcome performance problems with previous guards. The gains were so significant that the design was patented and Pro-pell is now the guard of choice for Surf rescue in several countries around the world.

PERFORMANCE

Pro-Pell propguards use a patented design to achieve optimal performance by: 

• Reducing cavitation.
• Increasing turning speeds.
• Getting up on the plane quicker.
• Generating more precise and positive handling than an outboard with an un-guarded prop.

These advantages are even more pronounced in surf conditions where the water is aerated. Pro-Pell guards also have the added advantage of protecting your prop from low impact damage

This product is a tool box in a tube. From repairing leaks to attaching bladder loops back to the floorboards this product does it all

401 Loctite is the ultimate toolbox-in-a-can, providing a reliable solution for most everyday repairs. It guarantees a strong, lasting bond to virtually all materials, making it an essential tool in any home. With its unmatched durability, it guarantees a hassle-free fix every time.

This 50L dry bag is constructed from durable waterproof material, making it ideal for protecting your valuables from water, dust, and snow. It has reinforced seams for added strength, making it suitable for extreme outdoor activities. With an adjustable shoulder strap for easy carrying, it allows for secure and convenient transport of your possessions.

5mm Quick Link made from 316 Stainless steel spring clips

70mm 316 Stainless steel spring clips

If you have size 13 or size 5 feet these can be adjusted to suit every driver or crewperson.

Made from industrial Velcro these are simple and fast to adjust.

Foot Strap Only, bolts sold separately 

Excellent choice for bonding lamited plastics, hardboard, sheetmetals, foam plastics etc.

• High bond strength
• Water resistant/ flexible
• Versatile
• Multipurpose
• High bond strength
• Bond most materials and substrates
• Water resistant / flexible
• Ideal for a wide variety of uses.

Aluminium 3 blade propeller, rubber hub.

10" diameter, 3-blades, 13" Pitch right-hand rotation.

Colour: Black

This propeller is suited for a 30hp Mercury outboard engine.

Lifesaving Aranica IRB 2008 in great condition.

• Hull in great condition
  
• Hold pressure well over 2 weeks
• No tearing around transom

Lifesaving Mercury 30hp short shaft 2010 with brand new propeller

• Serviced yearly. Has just been serviced
• PSP surf kit installed
• HT leads and Boots upgraded
• Brand New aluminum propeller

Comes with everything you need to get on the water:

• Foxton Beach Trailer
• 25L Quicksilver fuel tank with hose
• Oars x2
• Pump and pressure gauge
• Knife
• Storage Bag

Upgrade Options:

Stainless Steel Propeller Guards

2018 Arainca inflatable boat 3.8m. Perfect fishing boat to launch off the beach which can be done with one person. Can be rolled up for transport and storage;

Capacity: 6 people or total load 600Kg.

Boat dimensions when rolled up
1800 x 600 x 300mm

Floorboard dimensions when folded
1830 x 1030 x 100mm

Inflation pressure
3x inflatable pontoons 23kPa
1x inflatable keelson 27kPa

Included:
2x oars
pump (foot or hand) and pressure gauge.

Has 2x small patches both professionally repair, hull holds pressure for well over 2 weeks.

Recommended to be used with 25-30hp Mercury Outboard, stainless steel 3 blade propeller, Aluminum 3 blade propeller, propeller guard. 

The Black 15L Fuel Bladder includes all necessary components for immediate use. Simply choose your desired length for the fuel hose and we will install clips with 5mm Quick links and rope. You can remove any excess clips as needed. For optimal performance in racing, we recommend using rope, while Quick Links provide lasting durability. The fuel hose is covered with heat shrink to prevent any sharp edges that could cause harm to you or the hull.

The Black 25L Fuel Bladder includes all necessary components for immediate use. Simply choose your desired length for the fuel hose and we will install clips with 5mm Quick links and rope. You can remove any excess clips as needed. For optimal performance in racing, we recommend using rope, while Quick Links provide lasting durability. The fuel hose is covered with heat shrink to prevent any sharp edges that could cause harm to you or the hull.

Sunset long sleeve. Chest, back and sleeve print

The easiest way to empty a Fuel Bladder

Install the Dainer under the cap of the Jerry Can, rise the bladder above and let it empty.

Best, simplest, toughest all-round scuba knife.

Yellow handle. Rubber straps.

150mm single cutting edge blade with serration.

Made from marine grade 420 stainless steel for the ultimate in strength.

Incorporating a full rubber handle.

A conventional one-handed operation toggle style sheath and rubber straps.

Note: 420 stainless steel will always hold an edge but can be susceptible to surface rusting if not cleaned correctly after use.

This high quality boat pump has three pump options, including single and double action with one or two chambers, you can easily and quickly inflate your boat for a day out on the water. 

The hose is fitted with a Bay Port valve adapter.

This is for a single M6 x 25mm 316 stainless steel bolt. Two bolts are used either side of the recoil.

This is for a single M8 x 25mm 316 stainless steel bolt. At the back of the recoil

This is for a single M6 x 25mm 316 stainless steel bolt. Two bolts are used either side of the recoil.

This is for a single unit. There are two of these Bolts used in the Tiller Arm unit

1x Bolt

Replacement Rubber Cap

From time to time people get a bit rough and it breaks, now you can replace just the cap not needing to by a hole new valve.

Bridge Port Valve Nickel-plated brass removable core inflating/deflating with safety rubber cap

This is for a single unit. There are two of these Collar, Bushes are used in the Tiller Arm unit

This custom made spanner made from 10mm 304 Stainless Steel

Open end is 24mm for your steering adjustment

Ring end is 32mm for your adjustment

In the box above write the custom engraving you would like on the spanner, if you order multiple and want different text on each, write in the box above.

The engine is not meeting specifications. To solve this issue, remove the top two engine mount nylock nuts and replace them with these M10 Dome Nuts.

These are sold singularly.

Made with the highest quality materials, these engine clamp screws, also known as spinners, are designed with durability in mind. Each toggle includes a brass insert, foot, and bolt, all made of 316 stainless steel for long-lasting performance.

Sold singularly. 

Comes with Mounts, Bolts, Washer and Nyloc Nuts.

Genuine Mercury Quicksilver Female Fuel Connector

The Floor Loop Protector is a must-have for those who transport floorboards. Designed to prevent squashing and damage, this item ensures the longevity of your floor loops. Keep your equipment in top condition with this essential protector.

Genuine Mercury Fuel hose assembly

2.5m vs 3m fuel hose

lt comes down to which side of the outboard the fuel line connects. If standard side, Port (left) then 2.5m hose is perfect but if you have retrofitted it to the Starboard (right) then you will need the 3m hose so you can turn the outboard.

All Joins are covered with heat shrink to remove and shape edges. 

*These mats are made when ordered, 2-3 weeks from order to delivery*

Reusable mat with a replaceable, internal absorbent for catching leaks and drips when refuelling or uncoupling hoses.

The chain weighted sides keeps the spill mat in position even in windy conditions.

Two internal heavy duty oil/fuel absorbent mats (90cm x 90cm) catch and absorb the spill. Mats are manufactured from Envirosorb™, a highly absorbent hydrophobic (water repellent) polypropylene.

Mats are easily replaceable through the velcro sides when fully saturated with oil.

Tabs hold the mat in a tight roll for easy storage.

Special loop attachment allows mat to be hang during storage.

PVC backed mat protects the absorbent from mud and dirt on the ground.

Open weave shade cloth on the top of the mat allows easy penetration of spilt liquid.

8M0079092

161452

A pair 30hp Mercury Outboard transom brackets. 0N055505 & Up

The surface mounted Digital tach-hour Gauge allows you to easily monitor RPM and hours of use. These are the most accurate and reliable we have found. We use them for all our propeller testing.

• Large readable display allows you to easily monitor your engine's running hours up to 99,999 total hours ensuring that you perform proper maintenance on your engine.
• The LCD display lets you to easily view all gauge readings regardless of the angle or lighting conditions.
• Tachometer from 0-19999 rpms
• Non-resettable hour meter from 0-99999 Hours
• Surface mount for easy install, comes with double sided tape or can be bolted on
• Max RPM features
• Black case

Recommended setting for 30hp 2 stroke Mercury outboard. Pulse per revolution (PPr) 2.0

These high-quality HT Lead and Boot replacements bring peace of mind to your outboard ignition system. With their durable solid copper core, you'll never have to worry about performance issues again. Plus, with a 300mm length that can be customized to fit either the top or bottom cylinder, these aftermarket parts offer unmatched versatility.

MERCURY 30hp 2 CYL. 2-STROKE 0N055505 & Up 

PN 8M0214912

XD50 Synthetic Blend

XD50 is a performance enhanced synthetic blend oil that meets the specific demands of direct injection outboards and 2-Stroke outboards that specify TC-W3 certified oils.

• Reduced smoke for cleaner operation
• Protects against wear with superior lubricity
• Contains combustion cleaner to keep carbon in suspension and away from critical engine components
• XD50 should be used in high load and performance applications for greater dependability, reliability and reduced maintenance
• Formulated for extreme weather conditions, works down to -17°C

Need an outboard kill switch with safety lanyard, hold the button or pull off the lanyard to stop the outboard from running.

LOCTITE 263 is a red, dual cure, acrylic dimethacrylate ester fluorescent threadlocker designed for the permanent locking and sealing of threaded fasteners. It cures between close fitting metal surfaces and prevents loosening and leakage from shock and vibration. It works on active metals (e.g. brass, copper) and passive substrates such as stainless steel and plated surfaces.

Genuine Mercury Quicksilver Male Fuel Connector

SURF LIFESAVING NEW ZEALAND COMPETITION APPROVED

 This Patrol Service has been designed to get your 30hp Mercury ready for reliable operation for either surf lifesaving patrol or before the fishing season.

 Our Patrol Service 30 point check.

1. Change Gear Box Oil.
2. Water pump impeller and housing assessed for condition*.
3. Gear box bolts greased and tightened.
4. Prop guard bolts Loctite and tightened.
5. Prop guard veins straightened.
6. Prop guard inspected for cracks and repaired.*
7. Propeller Split pin and Crown nut assessed for condition*.
8. Gear lever selector Loctite and tightened.
9. Recoil removed, cleaned and assessed for condition*.
10. Tiller arm assembly assessed for condition*.
11. Tiller arm mount bolts greased and tightened.
12. Tiller arm tension set so it doesn’t fall.
13. Check the motor makes full throttle.
14. Inspect the chock for function and doesn't stick.
15. Clean fuel filter.
16. Fuel bayonet assessed for condition*.
17. Check fuel lines are not kinked or damaged*.
18. Check spark plug leads/caps not damaged*.
19. Air Box bolts secured with Loctite.
20. Check electrical wires for damage.
21. Tidy electrical wires with new cable tie.
22. Toggle not bent*.
23. Toggle Feet Secured with Loctite.
24. Check no arcing of electrical Leads.
25. Set Idle and fuel mixture.
26. Compression test both chambers.
27. Grease motor nipples.
28. Check Safety Strop for condition*.
29. Engine cleaned.
30. Fit Cowling.

*  May require additional parts, costs are charge additionally to service price.

Please enquire with any questions

This Performance Service has been designed to get your 30hp Mercury ready to race at its optimal performance. While ensuring your tilt and steering hold strong throughout the weekend.

This is recommended to be done once a season or before a major competition (North Island Championships and NZ IRB Nationals).

 Our performance 50 point check.

1. Change Gear Box Oil.
2. Adjust turning arc to within specification.
3. Water pump impeller assessed for condition*.
4. Water pump housing assessed for condition*.
5. Gear box bolts greased and tightened.
6. Prop guard bolts Loctite and tightened.
7. Prop guard veins straightened.
8. Prop guard inspected for cracks and repaired.*
9. Prop guard and prop has uniform clearance.
10. Propeller Crown nut assessed for condition*.
11. Propeller Split pin assessed for condition*.
12. Gear lever selector Loctite and tightened.
13. Recoil removed, cleaned and assessed for condition*.
14. Pull cord rope not frayed, or damaged*.
15. Pull cord handle assessed for condition*.
16. Pull cord catch assessed for condition*.
17. Recoil bolts tight and Loctite.
18. Tiller arm assembly assessed for condition*.
19. Tiller arm mount bolts greased and tightened.
20. Tiller arm tension set so it doesn’t fall.
21. Throttle linkages not worn or loose.
22. Check the motor makes full throttle.
23. Inspect the chock for function and doesn't stick.
24. Clean fuel filter.
25. Check fuel bayonet can fit easily and adjusted.
26. Fuel bayonet cleaned as required.
27. Check fuel lines are not kinked or damaged*.
28. Check spark plug leads/caps not damaged*.
29. Air Box bolts secured with Loctite.
30. Check electrical wires for damage.
31. Fuel line on gear lever side if requested.
32. Tidy electrical wires with new cable tie.
33. Tilt tube cleaned and assessed for condition*.
34. Tilt tightening when adjusted.
35. Toggle not bent*.
36. Toggles cleaned.
37. Toggle Feet Secured with Loctite.
38. Check engine mount bolt spins.
39. Tension Engine mounts.
40. Steering stiffens when bolt is tightened.
41. Power tune motor.
42. Check no arcing of electrical Leads.
43. Set Idle.
44. Set fuel mixture.
45. Compression test both chambers.
46. Grease motor nipples.
47. Check Safety Strop for condition*.
48. Engine cleaned.
49. Sandpaper fitted to gear lever.
50. Fit Cowling.

*  May require additional parts, costs are charge additionally to service price.

Please enquire with any questions

I can confidently recommend this Phone & Radio Waterproof Bag. We have tested and proven them to be 100% waterproof, this bag allows you to use your phone or radio in any environment without worrying about water damage. Keep your device safe and functional with this essential accessory.

Our custom made pressure gauges have a range from 0-100kpa with indication every 2kpa. 

We have added a red line at 25kpa (recommended pressure for pontoons and kelson). 

They come with a protective shock cover and on the back we have attached a "ShockWatch" sensor that will change colour when dropped from greater than 1m to indicate that it might be damaged or need re-calibrating. 

The lens is removable to allow for calibration if required.

Bay bridge valve adapter included. This adapter can also be used on the end of a air compressor, and in a foot or hand pump hose.

We repair propeller guard, weather its a small weld or fully replacing a vain give us a call to discuss.

Welding from $50

Vain Replacement from $80

Sometime it maybe more cost effective to buy a new or used propeller guard.

Genuine Mercury Propeller Washer

This part is made to strengthen the mid section of the engine.

It can be tightened with a 24mm spanner which makes the turning tighten.

The tighter the turning the stronger the mid section will be.

Waterproof toggle switch to replaces from standard deadman switch. The standard switch can be unplugged and unscrewed and the new switch be screwed in and plugged straight in.

Pressure Gauge

custom made pressure gauges have a range from 0-100kpa with indication every 2kpa. 

We have added a red line at 25kpa (recommended pressure for pontoons and kelson). 

They come with a protective shock cover and on the back we have attached a "ShockWatch" sensor that will change colour when dropped from greater than 1m to indicate that it might be damaged or need re-calibrating. 

The lens is removable to allow for calibration if required.

Bay bridge valve adapter included. This adapter can also be used on the end of a air compressor, and in a foot or hand pump hose.

Pump

This high quality boat pump has three pump options, including single and double action with one or two chambers, you can easily and quickly inflate your boat for a day out on the water. 

The hose is fitted with a Bay Port valve adapter.

Gear lube pump and a quart of Hi Performance gear lube conveniently packaged together.
Use the pump to replace your gear case oil with ease. Fits all quart andliter bottles.
Gear lube pump: Fits all MerCruiser sterndrives and Mercury/Mariner outboards
(except models of Japanese origin) with a 3/8"16 drain/fill screw.
Adapter available Priced individually, sold @ multiples of 6
Quicksilver Branded, Clamshell Package Point of Sale Packaged
Interchange:
Mercury

PN 8M0072133

Mercury/Quicksilver Power Tune Engine Fuel System Cleaner

Brand new, genuine Mercury/Quicksilver Power Tune. This is a factory original equipment maintenance item, not aftermarket.

A blend of solvents and oil designed for combustion chamber deposit removal. Gum, varnish and deposits are softened and removed through the chemical action of this formulation through the fuel system and combustion chambers. For 2 and 4 cycle engines.

This is a custom made spanner made from 10mm 304 Stainless Steel

Open end is 24mm for your steering adjustment

Ring end is 32mm for your adjustment

If you would like Custom text engraved onto the spanner follow link

The Rescue Tube is designed to meet the Surf Life Saving equipment standards for flexibility, buoyancy, and sturdiness. Made with durable canvas and rope, plus a stainless steel clip resistant to corrosion. At 700 grams, it is lightweight and well-suited for lifesaving activities.

SURF LIFESAVING NEW ZEALAND APPROVED FOR IRB & POOL COMPETITIONS

Description:
IP54 waterproof.

High-quality louder speakers and microphone units provide clear audio communication.

Ergonomics design, feel more comfortable.

Rugged design reinforced cable, tensile resistance≥10 kg.

Sturdy plastic 360 rotating clips.

With 3.5 mm earphone jack.

Suitable for fire-fighting department, police, shopping malls, hospitals, airport staff to use.

Speaker Specification :
Dimension:φ45mm

Sensitivity:95±4dB@1KHz

Impedance:8 Ω

Rated Input Power:1W

Microphone Specification :
Dimension:φ6.0×2.7 mm

Sensitivity:-44±4dB @1KHz

Impedance:2.2KΩ

Cable Specification:
Color :black

Length:41 cm/16.14in (not stretch)

Diameter: φ5.5 mm

Material: PU

Durable temperature: -30℃-120℃

Compatible Radio Models:

Package Includes

• 1 x Retevis RS-112 speaker microphone

Capable of charging up to six radios simultaneously.

Capable of controlling the charging process to ensure high efficiency.

Self-switching (AC 100V-240V) power supply for international use.

Safe and reliable, withmultiple safety protection.

Application: for large-scale groups and labor-intensive activities (such as warehouse, property management, restaurants,supermarket and enterprise).

Compatible radios: Retevis RT22

Specification:

Input 5V/4A

Output:4.2V

Charging current :500mA(per pocket)

Dimension:25 x 20 x 6cm/9.84 x 7.87 x 2.36in

Weight:960g/33.86oz(include adapter)

Adapter cable length:143cm/56.3in

Package includes:

1 x RTC22 Six-Way charger

1 x Adapter(US/UK/EU/AU)

Features:

1. G shape earpiece fit snugly in ears without drops for long time comfortable wearing
2. With nice and crisp sound quality
3. Equipped with a volume adjustment knob, the volume can be adjusted according to your needs
4. Kenwood standard 2 pin plug work with most models, such as Retevis H777 RT22 RT21 and etc

Specification:

Note: The radio in the picture is just for demo, not include the package.

Package includes：

• 1x Earpiece
• 1 xSponge earmuff

1. RT22P ultra-thin portable license-free two way radio.

Retevis RT22P 15mm ultra-thin, License-free and small and portable radio, High capacity battery Type-C Alarm Channel Lock Two Way Radio for Hotel,school and market.

2. RT22P Lightweight and Portable radio.

For hotel workers who are always on the move, it is convenient to choose a lightweight and portable walkie talkie. The thickness of the walkie talkie is 15mm and the weight is about 103g, and you can easily hold in your hands or put in your pocket.

3. One-to-many Call

The walkie talkie has 16 channels. The same channel supports one-to-many calls, which can meet different call needs, improve work efficiency and help work fast running.

4. High battery capacity

Equipped with a 1620mAh battery, the walkie talkie can work over 15 hours and standby up to 72 hours . It is convenient for teachers to carry the walkie talkie for a long time.

5. Multiple charging options

The Type-C interface supports reverse insertion, and the walkie talkie can be charged conveniently. Additionally, you can charge the walkie talkie via a power bank, a computer or a car, which has more options.

Package Includes:

6 x RT22P FRS Radios

1 x Six-Unit Multi-Charger

6 x Belt Clips

1 x Manual

Full Synthetic Gear Lube (1 Quart)(946ml)

Key Features:
• Specifically formulated to optimize gear life by reducing friction
• Provides superior wear protection in severe operating conditions
• This unique synthetic formulation is shear stable
• Resists oxidation to ensure high performance over a wide range of ambient operating temperatures
• API GL-5/MIL-L-210E
Additional Details:
• Case Qty.: 12
• Colour: Gold
• Weight: 75W-90
Interchange:
Volvo Penta
• 1141679
Mallory
• 9-82801

• Hi-Performance Gear Lube (Quart)(12 per case) (946ml)

Key Features:

• Synthetic blended marine formulation reduces operating friction for increased performance

• Protects gears, bearings and other gear case components

• For use in high performance and high load operating conditions in both outboard and I/O lower units

• Designed to surpass the performance of the O.E. Hi-Performance gear lubricants

• GL-5 Rated

Additional Details:

• Colour: Blue-Green

• Weight: 80W-90

PN 18-9650-2

Genuine Mercury split pins for 30hp outboards

This is for a single unit. There are two of these springs in the recoil unit

30hp Mercury 0N055505 & Up

M8 316 Spring Washer

Smooth ID Clamps reduce the risk of leaks especially when used on thin walled hoses.

• Vibration resistant lip lock design. No hammering or crimping
• Unique buckle nest and smooth ID design reduces leak paths
• Double wrapped steel bands for additional strength
• Various materials for corrosive environments
• Available for hose assemblies up to 8" outside diameter

Tool required to install - Stainless Steel Cable Tie Tension And Cut Off Tool

Smooth ID Clamps reduce the risk of leaks especially when used on thin walled hoses.

• Vibration resistant lip lock design. No hammering or crimping
• Unique buckle nest and smooth ID design reduces leak paths
• Double wrapped steel bands for additional strength
• Various materials for corrosive environments
• Available for hose assemblies up to 8" outside diameter

Tool required to install - Stainless Steel Cable Tie Tension And Cut Off Tool

• Handy tool to tension and cut ties
• Perform the job professionally
• Makes fitting Stainless steel ties easy

If you need Stainless Steel Bands 35mm x 6mm

120mm x 120mm

Your chance to get your hands on a Sunset Beach Sticker. Once paid Judd or myself will give them to you.

Check out the size guide in the photos

Check out the size guide in the photos

Check out the size guide in the photos

Mercury 30ph, 2 CYL, 2-STROKE, 0N055505 & Up Swivel Bracket

PN - 853770T01

Mercury 30ph, 2 CYL, 2-STROKE, 0N055505 & Up Swivel Bracket

PN - 853770T01

The Tan 15L Fuel Bladder includes all necessary components for immediate use. Simply choose your desired length for the fuel hose and we will install clips with 5mm Quick links and rope. You can remove any excess clips as needed. For optimal performance in racing, we recommend using rope, while Quick Links provide lasting durability. The fuel hose is covered with heat shrink to prevent any sharp edges that could cause harm to you or the hull.

If your having trouble with your engine's Tilt not staying up replace these asap

Standard Hollow Tilt Tube

We recommend using the hollow tube as they do less damage to the rest of the engine if over tightened. Also the tube fails rather than the swivel bracket or transom brackets.

In extreme situations the hollow tube can be easily cut out.

PN 898101191

Ultra lightweight, durable woven fabric is built for the most intense workouts. These shorts contain mesh panels for strategic ventilation, along with 4 way stretch, so material moves better in every direction providing superior comfort. Sweat-wicking material construction dries fast. 

• Fit: Fitted
• Material: 100% Polyester

It's a versatile addition to any inflatable, allowing for countless uses.

The Walkie Talkie Dry Bags are designed especially for the New Zealand Surf Life Saving clubs so you know they are designed and built to last.

Walkie Talkie dry bags, ideal for keeping all your communications (two way radio and cell phone) plus keys, wallets etc dry while your at the beach, on the water. 

You can use the radio even when it is in the bag so no requirement to pull the radio out of the bag, just simply use it as normal!

Simply put the items inside and roll up the bag then clip together.

• 100 % Waterproof
• They can float with items inside
• Water Tight System
• Submersible and comfortable Nylon/Neoprene Construction
• Extra thick Neoprene straps to reduce any stress points in the strapping
• High-Grade Nylon Clips/Buckles
• Perfect  IRB Inflatable use/Surf Lifesaving
• Kayaking
• Water Sports
• Hunting and Fishing
• SAR Rescue Services

Space to hold 5 Can Capacity & 6 Slot Holder for air tools. See photo for measurements.

This is for a single M6 X 12.5 X 1.0 316 stainless steel flat washer. Two washer are used either side of the recoil.

This is for a single M6 X 12.5 X 1.0 316 stainless steel flat washer. Two washer are used either side of the recoil.

Stainless steel insulated water bottle.

comes with:

- 1x bottle 950ml, 1 x plain lid, 1x sipping lid, 1x straw.