SURF LIFESAVING NEW ZEALAND COMPETITION APPROVED

SURF LIFESAVING NEW ZEALAND COMPETITION APPROVED

Are you sick of your HT Lead and Boot arcing out?

Install these aftermarket HT Lead and Boot and never have that problem again.

Simply unscrew the old ones and screw in the new!

350mm long can be chopped to suit the top or the bottom cylinder.

Our custom made pressure gauges have a range from 0-100kpa with indication every 2kpa. 

We have added a red line at 25kpa (recommended pressure for pontoons and kelson). 

They come with a protective shock cover and on the back we have attached a "ShockWatch" sensor that will change colour when dropped from greater than 1m to indicate that it might be damaged or need re-calibrating. 

The lens is removable to allow for calibration if required.

Bay bridge valve adapter included. This adapter can also be used on the end of a air compressor, and in a foot or hand pump hose.

Genuine Mercury split pins for 30hp outboards

PN 8150264

Genuine Mercury Fuel hose assembly

2.5m vs 3m fuel hose

lt comes down to which side of the outboard the fuel line connects. If standard side, Port (left) then 2.5m hose is perfect but if you have retrofitted it to the Starboard (right) then you will need the 3m hose so you can turn the outboard.

All Joins are covered with heat shrink to remove and shape edges. 

The black 15L fuel bladders has a 2 week manufacturing time from payment received, we carry stock of tan 15L fuel bladders

When selecting a 15L fuel bladder, there are several options to consider, including rope attachment - officially approved for competition use, but may need to be replaced and can become undone - and metal attachments, which provide longer-lasting use.

For the fuel hose, consider the connecting side of the outboard - if it is the standard port (left) side, then the 2.5m hose is sufficient, but if it is retrofitted to the starboard (right) side, then the 3m hose is required to make the turn. Additionally, all joints are covered with heat shrink tubing for added protection.

Genuine Mercury Quicksilver male fuel bayonet

SURF LIFESAVING NEW ZEALAND COMPETITION APPROVED

Solid copper core

Install these aftermarket HT Lead and Boot and never have that problem again.

Simply unscrew the old ones and screw in the new!

300mm long can be chopped to suit the top or the bottom cylinder.

The Pro-Pell Propguards were developed in conjunction with Surf Lifesaving New Zealand to overcome performance problems with previous guards. The gains were so significant that the design was patented and Pro-pell is now the guard of choice for Surf rescue in several countries around the world.

PERFORMANCE

Pro-Pell propguards use a patented design to achieve optimal performance by: 

• Reducing cavitation.
• Increasing turning speeds.
• Getting up on the plane quicker.
• Generating more precise and positive handling than an outboard with an un-guarded prop.

These advantages are even more pronounced in surf conditions where the water is aerated. Pro-Pell guards also have the added advantage of protecting your prop from low impact damage

70mm 316 Stainless steel spring clips with quick links

• 4x Quick Links
• 4x 70mm Spring Clips

Standard Hollow Tilt Tube

We recommend using the hollow tube as they do less damage to the rest of the engine if over tightened. Also the tube fails rather than the swivel bracket or transom brackets.

In extreme situations the hollow tube can be easily cut out.

Buy single or a pair of Toggles (engine clamp screws, spinners) each Toggle comes with a brass insert, foot and bolt

They are made of 316 Stanless Steel.

This custom made spanner made from 10mm 304 Stainless Steel

Open end is 24mm for your steering adjustment

Ring end is 32mm for your adjustment

In the box above write the custom engraving you would like on the spanner, if you order multiple and want different text on each, write in the box above.

Stainless Steel 3 Blade Propeller, Rubber Hub

10" diameter, 3-blades, 11" Pitch, right-hand rotation, 20 degree rake, cupped, good cavitation resistance.

Recommended for 25-30hp Mercury outboard engine.

MERCURY 30hp 2 CYL. 2-STROKE 0N055505 & Up 

PN 8M0214912

This part is made to strengthen the mid section of the engine.

It can be tightened with a 24mm spanner which makes the turning tighten.

The tighter the turning the stronger the mid section will be.

The easiest way to empty a Fuel Bladder

Install the Dainer under the cap of the Jerry Can, rise the bladder above and let it empty.

Replacement part for 30hp Mercury

30hp Mercury Plastic Cowling, this plastics cowling is made for Mercury outboards with serial numbers ON160523 and up.

ONLY AVAILABLE TO LIFESAVING CLUBS.

 SURF LIFESAVING NEW ZEALAND APPROVED

There are a few different options to choose from when it comes to fuel bladders.

Rope attachment - Competition Approved but will need replacing and can come undone.

Metal attachments - Great for normal use, will out last the bladder.

2.5m vs 3m fuel hose

lt comes down to which side of the outboard the fuel line connects. If standard side, Port (left) then 2.5m hose is perfect but if you have retrofitted it to the Starboard (right) then you will need the 3m hose so you can turn the outboard.

All Joins are covered with heat shrink to remove and shape edges. 

Waterproof toggle switch to replaces from standard deadman switch. The standard switch can be unplugged and unscrewed and the new switch be screwed in and plugged straight in.

This high quality boat pump has three pump options, including single and double action with one or two chambers, you can easily and quickly inflate your boat for a day out on the water. 

The hose is fitted with a Bay Port valve adapter.

If your having trouble with your engine's Tilt not staying up replace these asap

This is a custom made spanner made from 10mm 304 Stainless Steel

Open end is 24mm for your steering adjustment

Ring end is 32mm for your adjustment

If you would like Custom text engraved onto the spanner follow link

The Pro-Pell Propguards were developed in conjunction with Surf Lifesaving New Zealand to overcome performance problems with previous guards. The gains were so significant that the design was patented and Pro-pell is now the guard of choice for Surf rescue in several countries around the world.

PERFORMANCE

Pro-Pell propguards use a patented design to achieve optimal performance by: 

• Reducing cavitation.
• Increasing turning speeds.
• Getting up on the plane quicker.
• Generating more precise and positive handling than an outboard with an un-guarded prop.

These advantages are even more pronounced in surf conditions where the water is aerated. Pro-Pell guards also have the added advantage of protecting your prop from low impact damage

Replacement part for 30hp Mercury

Good condition second hand 30hp Mercury fiberglass Cowling.

Small amount of wear and tread but works perfectly fine.

This fibreglass cowling is made for Mercury outboards with serial numbers ON160522 and down.

Excellent choice for bonding lamited plastics, hardboard, sheetmetals, foam plastics etc.

• High bond strength
• Water resistant/ flexible
• Versatile
• Multipurpose
• High bond strength
• Bond most materials and substrates
• Water resistant / flexible
• Ideal for a wide variety of uses.

The Floor Loop Protector is a must-have for those who transport floorboards. Designed to prevent squashing and damage, this item ensures the longevity of your floor loops. Keep your equipment in top condition with this essential protector.

A pair 30hp Mercury Outboard transom brackets.

Need an outboard kill switch with safety lanyard, hold the button or pull off the lanyard to stop the outboard from running.

• 20 Liter capacity
• Easy to Use
• Self-Venting Spout
• Spout stores inside when not in use
• Compact profile for easy storage
• Measures 470(H) x 330(L) x 190(W)mm

The Scepter fuel container are made from durable high-density polyethylene, the containers are strong, rust-proof and non-corrosive. Its unique military style profile carries a smaller footprint making it easy to store in smaller spaces.

The tan 25L fuel bladders has a 2 week manufacturing time from payment received, we only carry stock of tan 15L fuel bladders

There are a few different options to choose from when it comes to 25L fuel bladders.

Metal attachments - Great for normal use, will out last the bladder.

2.5m vs 3m fuel hose

lt comes down to which side of the outboard the fuel line connects. If standard side, Port (left) then 2.5m hose is perfect but if you have retrofitted it to the Starboard (right) then you will need the 3m hose so you can turn the outboard.

All Joins are covered with heat shrink to cover any shape edges. 

Loctite 454 is an instant adhesive designed for the assembly of difficult-to-bond materials which require uniform stress distribution and high tensile and/or shear strength. The product provides for the rapid bonding of a wide range of materials, including metals, plastics and elastomers. The gel consistency enables overhead and vertical application. Loctite 454 is also suited to bonding porous materials such as wood, paper, leather and fabric. Perfect for all quick repair jobs.

LOCTITE 263 is a red, dual cure, acrylic dimethacrylate ester fluorescent threadlocker designed for the permanent locking and sealing of threaded fasteners. It cures between close fitting metal surfaces and prevents loosening and leakage from shock and vibration. It works on active metals (e.g. brass, copper) and passive substrates such as stainless steel and plated surfaces.

Comes with Mounts, Bolts, Washer and Nyloc Nuts.

Perfect for on patrol or just normal use. Have been straightened after bent. This is for a single toggle

The engine is not meeting specifications. To solve this issue, remove the top two engine mount nylock nuts and replace them with these M10 Dome Nuts.

Aluminium 3 blade propeller, rubber hub.

10" diameter, 3-blades, 13" Pitch right-hand rotation.

Colour: Black

This propeller is suited for a 30hp Mercury outboard engine.

This product is a tool box in a tube. From repairing leaks to attaching bladder loops back to the floorboards this product does it all

401 Loctite is the ultimate toolbox-in-a-can, providing a reliable solution for most everyday repairs. It guarantees a strong, lasting bond to virtually all materials, making it an essential tool in any home. With its unmatched durability, it guarantees a hassle-free fix every time.